www.ThinkITI.com

Home
MCQ
Search
Free Apps
Important
Study Groups
Contact Us
Policy

Home
MCQ
Objective Questions
ITI
Machinist
Machinist Set-1
Milling
60

Milling MCQ - Machinist(Set-1) with Answers

60) Which one of the following is an advantage of up cut milling ?

Backlash eliminator is not required

Downward pressure during milling is high

Cutter wear is less

Suitable for milling thin plates

Answer is:

Backlash eliminator is not required

Milling MCQ - Machinist(Set-1) with Answers

For more MCQ's Click Here

Related Milling MCQ - Machinist(Set-1) with Answers

61) In milling, feed is defined as the rate at which the work is fed to the revolving cutter. Which is the correct expression for the unit of feed rate in milling ?

m / min.

mm / rev.

mm / sec.

mm / min.

Answer is:

mm / min.

62) Two side and face milling cutters were mounted on a long arbor in a milling machine with arbor support. The arbor nut should be :

Tightened after the overarm support is in place

Tightened before the arbor support is in place

Tightened with extra large leverage

Allowed to tighten on its own during spindle rotation

Answer is:

Tightened after the overarm support is in place

63) Solid milling cutters are manufactured from :

Sintered carbide

High speed steel

Ceramic

Stellite

Answer is:

High speed steel

64) While milling through slot in a mild steel plate with a Dia 12 mm end mill cutter on vertical milling machine, the cutter slips and breaks. What is to be done ?

Reset the spindle to a higher speed

Reduce the cutting speed

Increase the depth of cut

Reduce the depth of cut and feed

Answer is:

Reduce the depth of cut and feed

Milling MCQ - Machinist(Set-1) with Answers

For more MCQ's Click Here