m / min.

mm / rev.

mm / sec.

mm / min.

Tightened after the overarm support is in place

Tightened before the arbor support is in place

Tightened with extra large leverage

Allowed to tighten on its own during spindle rotation

Sintered carbide

High speed steel

Ceramic

Stellite

Reset the spindle to a higher speed

Reduce the cutting speed

Increase the depth of cut

Reduce the depth of cut and feed

Select comparatively finer feed rate and less depth of cut

Select coarse feed

Select coarse feed with low depth of cut

Select coarse feed with high cutting speed