Faceplates are used to hold work that is too large or of such a shape that it cannot be held in a chuck or between centers. Faceplates are equipped with several slots to permit the use of bolts to secure the work, so that the axis of the work-piece may be aligned with the lathe centers. When work is mounted off – center, a counterbalance should be fastened to the faceplate to prevent imbalance and the resultant vibrations when the lathe is in operation.
34) An irregular shaped work piece is turned on a lathe. Which one of the following work holding accessory is used?
Answer is:
Face plate
Explanation:
ISRO Technician-B Machinist Question Paper - 2012 (Set -1) with Answer Key
For more MCQ's Click HereRelated ISRO Technician-B Machinist Question Paper - 2012 (Set -1) with Answer Key
Answer is:
Morse taper
Explanation:
Morse taper is used on spindle nose of the lathe head stock. The small female taper is a Morse taper to take a lathe center or a tool such as a twist drill. The large male taper takes a lathe chuck, which is retained by the large nut.
Answer is:
None of these
Answer is: