64) In an installation four numbers of similar cable joints are soldered with the help of the same pot ladle and solder by the same cable jointer. It is found that the quality of fourth joint is not good.(The surface is dull and flow is improper) The reason m
solder has lost tin due to repeated heating
Related Conductors and Insulation MCQ - Electrician (Set-1) with Answers
Lead and Tin
Soldering is a process in which two or more metal items are joined together by melting and flowing a filler metal into the joint, the filler metal having a relatively low melting point. Solder is an alloy of 50% Lead & 50% Tin.
Soldering is distinguished from brazing by use of a lower melting-temperature filler metal; it is distinguished from welding by the base metals not being melted during the joining process. In a soldering process, heat is applied to the parts to be joined, causing the solder to melt and be drawn into the joint by capillary action and to bond to the materials to be joined by wetting action. After the metal cools, the resulting joints are not as strong as the base metal, but have adequate strength, electrical conductivity, and water-tightness for many uses.
