464) The objective of caulking in a riveted joint is to make the joint

Answer is:

leak-proof

The objective of caulking in a riveted joint is to make the joint

Machine Design MCQ with Answers

For more MCQ's Click Here

465) A material is stressed within elastic limit and its linear strain is double as compared to lateral strain. The ratio of its Bulk modulus to Young's modulus will be equal to one.

Answer is:

Incorrect

466) A jam nut is a locking device in which

a thinner nut is tightened down over a thicker or main nut and the main nut is tightened against the thinner nut by loosening

a slot is cut in line with the centre of each face and a split pin passes through two slots in the nut and a hole in the bolt, so that a positive lock is obtained unless the pin shears

a slot is cut about half way through the nut and a small screw is tightened between the nut and the bolt in order to produce more friction

the bottom cylindrical portion is recessed to receive the tip of the locking set screw

Answer is:

a thinner nut is tightened down over a thicker or main nut and the main nut is tightened against the thinner nut by loosening

467) The difference between the upper limit and lower limit of a dimension is called

Answer is:

tolerance

Explanation:

Tolerance is defined as the difference between the maximum and the minimum sizes allowed in manufactured components.

The difference between the upper limit and lower limit of a dimension is called

468) The algebraic difference between the actual size and the corresponding basic size is called actual deviation.

Answer is:

Agree

Machine Design MCQ with Answers

For more MCQ's Click Here

464) The objective of caulking in a riveted joint is to make the joint

leak-proof

Machine Design MCQ with Answers

Related Machine Design MCQ with Answers

465) A material is stressed within elastic limit and its linear strain is double as compared to lateral strain. The ratio of its Bulk modulus to Young's modulus will be equal to one.

Incorrect

466) A jam nut is a locking device in which

a thinner nut is tightened down over a thicker or main nut and the main nut is tightened against the thinner nut by loosening

467) The difference between the upper limit and lower limit of a dimension is called

tolerance

468) The algebraic difference between the actual size and the corresponding basic size is called actual deviation.

Agree

Machine Design MCQ with Answers